Our Wood flush register covers help transform a room’s appearance with minimal effort. Although it’s designed mostly for new floor installations, they can also be retrofitted by an experienced craftsman. These wood flush registers are perfect for new construction projects.
It is ¾” thick and designed to sit flush on this sized hardwood floors. We also accept custom made orders to your specific thickness. The register comes integrated with a box unit that makes installation easy. The installation will be done while the floor is being installed. With a wooden box built in the floor around the duct opening upon floor installation, the vent will drop in place. The vent is held in the box by magnets, making it easy to remove when needed. It’s a very simple process which avoids having to router or cut your flooring after it has been installed.
The Flush registers will give you a seamless and invisible look between the floor and the register. Upscaling your floor to a high-quality craftsman work not only increases the elegance but also the value of your home. With a ¼” thick solid oak wood, we are making it easier to resurface the floors in the future. You don’t have to remove vents or buy new ones.
The advantage of this Stellar Air Wood Flush Register is that they can be stained at the same time as the floor, and you can also replace the decorative vent for any other design we have available if you decide to change the home décor! These registers will not only last a lifetime when properly maintained but are sure to enhance and spruce up the look of any room of space. If another size is needed, please contact us at info@stellarairvents.com to work on your project.

Sunburst – Vent Cover Wood flush registers (new construction)

Professionally Crafted Air Vent


Estimated Shipping date Jul 31, 2024

Don’t see your size? We can help you order a custom size.

Email Us

Call Us

Request a Call

Product Details

-These Wall and Ceiling registers are 1/4 thick solid oak wood.
-The decorative vent has magnets that snap in place with the installation wood box.
-No dampers included.
-Your hardwood floors can be sanded without removing the vents.


Please refer to your air manufacturer’s information on the tag located with your unit for the specifications to be compatible with the Product Details of your selected Stellar Air design.

*Please note that all Stellar Air covers are made with quality natural wood and are unstained and unfinished. if you are interested in getting your vent white primer base ( this is for customers that would like to add color paint later), you can select white primer base option from the drop down menu. Stain option is not available.

How to Measure

Our craftsmen will fabricate a ventilator to fit your supply duct opening.

  1. Remove the old register or grille from the floor, ceiling, or wall to expose the actual duct opening.
  2. Measure the inside dimensions of the duct opening.
  3. The width will always be listed first, followed by the length.


2 ton 781 CFM (2% airflow drop)
0.0201 I.W.C. pressure drop
464 FPM (186% of recommended)


3 ton 1152 CFM (4% airflow drop)
0.0329 I.W.C. pressure drop
602 FPM (241% of recommended)

4 ton 1552 CFM (3% airflow drop)
0.0632 I.W.C. pressure drop
746 FPM (298% of recommended)


Be the first to review “Sunburst – Vent Cover Wood flush registers (new construction)”

Your email address will not be published. Required fields are marked *